Research

Publications:

List of Research Publications – Dr. Faraz Akbar
2017

bullet.jpg

Akbar, F., Fozan, M., Anwar, N., Habib, Z., Khalid, M., and Nadeem, S. ‘Comparative Study of Three Vehicle Bodies by Using Computer Aided Design (CAD): Part-I’. Conference on Emerging Trends in Automotive Engineering (CETAE-2017), 2017, Organized by the Department of Automotive and Marine Engineering, NED University of Engineering and Technology, Karachi, Pakistan.
bullet.png Akbar, F., Fozan, M., Anwar, N., Habib, Z., Khalid, M., and Nadeem, S. ‘Comparative Study of Aerodynamic Characteristics of Three Hatchback Vehicles by Using Computational Fluid Dynamics (CFD): Part-II’. Conference on Emerging Trends in Automotive Engineering (CETAE-2017), 2017, Organized by the Department of Automotive and Marine Engineering, NED University of Engineering and Technology, Karachi, Pakistan.
2013
bullet.png Akbar, F., Mativenga, P. T., and Sheikh, M. A. ‘Heat partition based design of hard coatings in high-speed machining’. International Journal of Machining and Machinability of Materials (IJMMM), 2013, 14 (4), 363-386.
2010
bullet.png Akbar, F., Mativenga, P., and Sheikh, M. ‘An experimental and coupled thermo-mechanical finite element study of heat partition effects in machining’. The International Journal of Advanced Manufacturing Technology, 2010, 46 (5), 491-507.
bullet.png Akbar F, Mativenga P T, Sheikh M A. ‘Prediction of Heat Partition in Metal Cutting - A State of-the-Art Review of Conventional to High Speed Machining’. “Metal Cutting – Recent Advances”. NOVA SCIENCE PUBLISHERS (USA) – Research Book: “Metal Cutting – Research Advances” 2010,              (ISBN: 978-1-61122-573-0), 23-75.
2009
bullet.png Akbar, F., Mativenga, P. T., and Sheikh, M. A. ‘On the heat partition properties of TiAlN compared to TiN coating in high-speed machining’. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2009, 223 (B4), 363-375.
bullet.png Akbar, F., Mativenga, P. T., and Sheikh, M. A. ‘Predictive modelling of average heat partition in high-speed machining of AISI/SAE 4140 steel’. International Journal of Machining and Machinability of Materials, 2009, 5 (2/3), 135-154.
2008
bullet.png Akbar, F., Mativenga, P. T., and Sheikh, M. A. ‘An evaluation of heat partition in high-speed turning of AISI/SAE 4140 steel with uncoated and TiN-coated tools’. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008, 222, 759-771.
bullet.png Akbar, F., Mativenga, P. T., and Sheikh, M. A. ‘An evaluation of heat partition models in highspeed machining of AISI/SAE 4140 steel’. The 6th International Conference on Manufacturing Research            (ICMR-08), 2008, 1, 13-21.
2007
bullet.png Akbar, F., Mativenga, P. T., and Sheikh, M. A. ‘An investigation of the tool-chip interface temperature and heat partition in high-speed machining of AISI/SAE 4140 steel with TiN coated tool’. Proceedings of the 35th International MATADOR Conference, 2007, 1, 215-218.
Conference Presentations
2008
bullet.png Akbar, F., Mativenga, P. T. & Sheikh, M. A. (2008) Predictive analytical and fem modelling of heat partition in high-speed machining with coated tools, Presentation given at the School of Mechanical, Aerospace and Civil Engineering (MACE) postgraduate Research Conference, The University of Manchester, 27th June 2008.
2007
bullet.png Akbar, F., Mativenga, P. T. & Sheikh, M. A. (2007) Analysis of heat partition and cutting temperature for coated tools in high-speed machining, Poster Presentation given at the School of Mechanical, Aerospace and Civil Engineering (MACE) postgraduate Research Conference, The University of Manchester, 21st February 2007.
List of Research Publications – Dr. Saqib Jamshed Rind
2019
bullet.png Palwasha Rauf , Mohsin Jamil, Syed Omer Gilani, Saqib Jamshed Rind,“ Comparison of Nonlinear Controllers for Speed Control of DC Motor”, IEEE 9th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON), Vancouver, BC, Canada, pages 389 - 394, November, 2018.
ISBN: 978-1-5386-7266-2, DOI: 10.1109/IEMCON.2018.8614853.
2018
bullet.png Saqib Jamshed Rind, Anas Amjad, Mohsin Jamil ,“ Rotor Flux MRAS based Speed Sensorless Indirect Field Oriented Control of Induction Motor Drive for Electric and Hybrid Electric Vehicles”, 53rd International Universities Power Engineering Conference (UPEC), Glasgow, UK, pages 1-6, September 2018.
ISBN: 978-1-5386-2910-9, DOI: 10.1109/UPEC.2018.8542009.
bullet.png Saqib Jamshed Rind, Mohsin Jamil , Anas Amjad,“Electric Motors and Speed Sensorless Control for Electric and Hybrid Electric Vehicles: A Review”, 53rd International Universities Power Engineering Conference (UPEC), Glasgow, UK, pages 1-6, September 2018.
ISBN: 978-1-5386-2910-9, DOI: 10.1109/UPEC.2018.8541871.
2017
bullet.png Saqib Jamshed Rind, Yaxing Ren, Yihua Hu, Jibing Wang, Lin Jiang, “Configurations and control of traction motors for electric vehicles: A review”, Chinese Journal of Electrical Engineering, vol.3 , issue.3, December 2017.                                                                                                                            ISSN: 2096-1529, DOI: 10.23919/CJEE.2017.8250419
bullet.png Saqib Jamshed Rind “Speed sensorless induction motor drive control for electric vehicles”, PhD Dissertation, University of Liverpool, July 2017.
2015
bullet.png Saqib Jamshed Rind, Y. Ren, K. Shi, L. Jiang, and M. Tufail, Rotor flux-MRAS based speed sensorless non-linear adaptive control of induction motor drive for electric vehicles, 50th International Universities Power Engineering Conference (UPEC), Stoke on Trent, UK, pages 1-6, September 2015.
ISBN: 978-1-4673-9682-0, DOI: 10.1109/UPEC.2015.7339869.
2014
bullet.png Saqib Jamshed Rind, Yaxing Ren, and Lin Jiang, Traction motors and speed estimation techniques for sensorless control of electric vehicles: A review, 49th International Universities Power Engineering Conference (UPEC), Cluj-Napoca, Romania, pages 1-6, September 2014.
ISBN: 978-1-4799-6557-1, DOI: 10.1109/UPEC.2014.6934646.
bullet.png Saqib Jamshed Rind, Y. Ren, and L. Jiang, MRAS based speed sensorless indirect vector control of induction motor drive for electric vehicles , 49th International Universities Power Engineering Conference (UPEC), Cluj-Napoca, Romania, pages 1-6, September 2014.
ISBN: 978-1-4799-6557-1, DOI: 10.1109/UPEC.2014.6934645.
bullet.png Muhammad Tufail, Frans Coenen, Tintin Mu, Saqib Jamshed Rind, Mining movement patterns from video data to inform multi-agent based simulation, International Workshop on Agents and Data Mining Interaction, May, 2014.
2007
bullet.png Saqib Jamshed Rind, “Advanced control techniques of induction motors” M.Sc Dissertation, Newcastle University, August 2007.
List of Research Publications – Dr. Noman Uddin Yousuf 
Publications
bullet.png Yousuf, N., Anderson, T., Gschwendtner, M. and Nates, R., 2016, “Predicting the Pumping Characteristics of Multiple Parallel Tube Air-Lift Pumps”, Proceedings of the 20th Australasian Fluid Mechanics Conference, Perth, December 2016
bullet.png Yousuf, N., Anderson, T., Gschwendtner, M. and Nates, R., 2016, “Performance of a Cooling System Driven by Engine Exhaust Heat”, Proceedings of the 4th International Conference on Sustainability and the Cold Chain, Auckland, April 2016
bullet.png Yousuf, N., Biteau, E., Anderson, T., Gschwendtner, M. and Nates. R., 2014, “Modelling the Performance of a Diffusion Absorption Refrigeration System”, Proceedings of the 2014 Asia-Pacific Solar Research Conference, Sydney, December 2014
List of Research Publications – Mr. Assad Anis
Journal Papers
2017
bullet.png Assad Anis, Design analysis and optimization of a crankshaft of a tractor, International Journal of Advanced Engineering and Technology, ISSN: 2456-7655.
bullet.png Assad Anis, Computation of Micro-strains in Cold Formed Steels- FEA, International Journal of Mechanical Engineering and Applications, 2017; 5(5): 275-2812016, ISSN: 2330-023X (Print); ISSN: 2330-0248 (Online)
2016
bullet.png Assad Anis, Prediction of Fatigue Life of Welded Structures, American Journal of Mechanical and Industrial Engineering 2016; 1(3): 91-95, doi:10.11648/j.ajmie.20160103.19.
2012
bullet.png Assad Anis, Prediction of Residual Stresses in cold formed corners, Journal of Advanced Science and Engineering Research Vol. 2, No 4 December (2012) 252-264, ISSN: 2231-8844.
bullet.png Assad Anis, ‘‘A Finite Element Analysis Approach to predict the stress concentration factors in Cold Formed Corners’’, International Journal of Mechanical & Mechatronics Engineering, IJMME-IJENS Vol. 12, pg 94-98, Issue: 04 ISSN: 2227-2771.
bullet.png Assad Anis, ‘‘Simulation of Slider-Crank Mechanism using ADAMS software’’. International Journal of Engineering & Technology IJET-IJENS, Vol. 12, pg 108-112, Issue: 04, ISSN: 2227-2712.
Conference Papers
2013
bullet.png Assad Anis, Investigations of micro-strains in structural members using finite element analysis, International conference on modeling & simulation, ICMOS 2013, November 25-27 2013, Islamabad, Pakistan.
2011
bullet.png Assad Anis, ‘‘Investigation of Stress Concentration Factors in cold formed rectangular hollow steel tubes’’, International Conference on Advanced Modeling and Simulation, 28-30th November 2011, Islamabad, Pakistan, ISBN:978-8698535-11-7
2008
bullet.png

Assad Anis, Design & Development of Cold Gas Propulsion System for PRSS, ICAST 2008, 2nd International Conference on Advances in Space Technologies, Islamabad, Pakistan, 29th – 30th November, 2008, IEEE, ISBN: 9781-4244-3299-8, Page 49-53, November 2008. 

Book
bullet.png Fatigue Strength of Cold Formed Members, Autor: Assad Anis, ISBN: 978-3847336822.
Book Chapter
bullet.png Book chapter titled ‘‘Cold Gas Propulsion Systems – An ideal choice for remote sensing small satellites’’ in a book ‘‘Remote Sensing’’ published in March 2012, ISBN: 979-953-307-231-8, Edited by Dr. Boris Escalante UNAM, Facultad Ingeniería, División de Ing. Eléctrica, Mexico.